Cutout Clamps are applied with a clampstick into the bottom hinge contact of a cutout. This clamp can be used as part of a ground assembly or by using a contact stud using a standard grounding assembly with “C” clamps from the stud to ground.
Grounding Cables are made with extra flexible strand of
soft drawn #30 AWG (.01”) copper and are available in three
different jackets.
The Concentric Neutral Jumper Assembly is used for
bonding purposes on non-jacketed cable. It is usually
installed across a portion of cable to be cut, repaired, or
spliced. The assembly is left in place until the concentric
neutral is spliced. As a safety precaution, follow all of your
organization’s applicable rules and/or policies pertaining
to faulted cable, spiking, and grounding.
The components of the Underground Dead Break
Ground Set provide safe and simple grounding
methods on padmount transformers or any related URD
equipment. These grounds can be ordered in complete
sets or individual components. The jumpers are made
with 6 foot (1.83 m) lengths of #2, clear-jacketed, extra
flexible cable. Clamps (7640001E) supplied include an
eye for a grip-all insulating stick application.
The URD Grounding Assembly is used for
underground personal protective grounding elbow
used for grounding pad-mounted equipment, switches
and transformers when performing de-energized
maintenance on URD distribution systems, and
draining DC capacitive charges from de-energized
URD cables.