Sets for Grounded “Y” Systems provide all the
equipment required to safely ground a variety of
structures on a grounded “Y” distribution systems.
Factory assembled kits are for conductors ranging
from #6 to 1-1/2” (3.8 cm) diameter, with serrated
jaw “C” clamps with threaded terminals. All
clamps are supplied with eye screws for installation
with clampstick (not included). Other lengths and
configurations are available.
Standard Equipotential Grounding Sets provide
all the equipment required to safely ground a variety
of structures on delta distribution systems. Factory
assembled kits are for conductors ranging from #6
to 1-1/2” (3.8 cm) diameter, with smooth or serrated
jaw clamps with threaded terminals. All clamps are
supplied with eye screws for installation with gripall
clampsticks (not included). Other lengths and
configurations are available.
Ball Socket 4-Way Connecter Sets are
designed for variable angle accessibility,
three-phase grounding. It is supplied with
three-foot leads and six feet of cable from
a common connection to ground. Upper
heads are ball socket clamps (7542CM1E).
Lower ground head is standard “C” type
ground head (760001E) with a range of #6
to 1-1/4” (32 mm). Ball studs needed but
Quick Grip Clamps are specifically designed
and ideally suited for temporary grounding where
spacing and orientation of components limit the
use of traditional ground clamps. The Quick Grip
Ground Clamp is available with a Grip-All eye
or a Bayonet fitting for installation with a live
The 4-Way Connecter Sets are made with
#2 clear-jacketed, extra flexible cable, three
8-foot (2.44 m) leads from the heads to the
common connection, and one 50-foot (15.25
m) lead from the common connection to the
ground connection. The grounding 4-way
connector set has a fixture to raise and lower
the set which can be easily tied onto the pole.
The 752076 grounding 4-way connector set
is also supplied with 3 fiberglass handles
(10078BC) and bag. The 752576 grounding
4-way connector set requires a clampstick.
Sets come with bags. Other lengths and
configurations available. Meets ASTM F 855
Grade 1 specifications. Maximum fault duty
is 14.5 kA for 15 cycles.
The Industrial Ground Set consists of three
upper ground heads, one lower head, visible
trifurcation, six-foot (1.83m) leads to common
connections, and a twenty foot lead
from common to ground connection.
All ground heads (7541B and 7541T)
will accept 4”x 4”(10.2 x 10.2 cm) copper
or aluminum bus configurations.
Ground Sets include three upper heads and are easily and safely
attached to the line with the fiberglass handles. The ground heads
have a maximum opening of 1-3/4” (4.4 cm) and can
be applied to angle irons, flat busses
as well as on-line wires. A tight,
four-point contact is made with
the quick adjusting screw. The
handles are easily removed when
necessary. The lifting fixture
provides ease when raising
and lowering the set, and eliminates
hanging the entire ground set’s weight on
the conductor. Other lengths and configurations