Stick Installed Flexible Jumpers can be manufactured for hot stick operations using Salisbury heavy-duty eye clamps. Clamps are rated for continuous current and fit all standard shotgun type hot sticks. For ease of application, a Hanger Stud is recommended. Shrouded ferrules are not recommended for use with eye type clamps.
Flexible Insulated Jumper Cables are lightweight and resistant to oil, heat, moisture, ozone and abrasion. The cable is embossed every three feet with conductor size and kV rating.
Clear Plastic Jumper Clamps are compact, lightweight, and
virtually unbreakable. The transparency allows easy inspection of
the ferrule and cable inside of the handle. The body and jaw are
made from a copper base alloy. The lower floating ring contact is
bronze. These handles should be cleaned only with a mild detergent
to maintain the transparency of the handle. Assembled kits are sold
with a 10 ft. (3m) cable and unshrouded ferrules.
FRP Jumper Clamps are designed for maximum loads, voltages,
and cables. During a temperature rise test at 25% overload, these
clamps heated 35% less than 4/0 cu. cable. Blunted points on the
handle provide optimum grip, resist impact, and will not soften
with overloads. The body and jaw are made from a copper based
alloy. The lower jaw is made of self lubricating bronze. The
assembled jumpers are sold with a 10ft. (3m) or 12 ft. (3.7m) cable
and unshrouded ferrules.
SALCOR® Jumper Clamps are available
in two main line sizes with a maximum use
voltage of 35kV.