Underground Grounding Studs

The 1735 grounding stud (Shown Here) is made of 7/8” diameter copper with a 5/8-11 female thread on one end and a 1” (2.5 cm) hex drive on the other end for application with a socket drive. The cross bar perch is 3/4” diameter copper, providing heavy duty service. This ground plug also comes equipped with a tapered guide and the yellow protective cap.

Product Options Available

SKU Name Description
17250003 Underground Grounding Studs Steel Electrode, Male, Grip-All, w/Guide, Threads: 5/8-11 (M), Material: Steel, Grade: 3, Fault Duty 15 Cycles: 27 kA
17250004 Underground Grounding Studs Steel Electrode, Female, Grip-All, w/Guide, Threads: 5/8-11 (F) , Material: Steel , Grade: 3, Fault Duty 15 Cycles: 27 kA
17250005 Underground Grounding Studs Steel Electrode, Male, Grip-All, Threads: 3/4-10 (M) , Material: Steel , Grade: 3, Fault Duty 15 Cycles: 27 kA
1725001 Underground Grounding Studs Copper Electrode, Female, Hex Drive, w/Guide, Threads: 5/8-11 (F) , Material: Cu , Grade: 1, Fault Duty 15 Cycles: 17 kA
1735 Underground Grounding Studs Copper Electrode, Female, Hex Drive, w/Guide, Threads: 5/8-11 (F) , Material: Cu , Grade: 4, Fault Duty 15 Cycles: 35 kA
5900CS Underground Grounding Studs Captured Socket for 1725001 and 1735

Underground Grounding Studs Features and Benefits

Also available, the 1712 and 1725 grounding stud series are used for grounding when the fault duty on the 600 amp Deadbreak elbow/ “T” body exceeds the rating of a 200 amp grounding elbow, as rated by IEEE 386 @ 10kA for 10 cycles. Grounding studs consist of a 10” conductor stud with male or female threads for replacing 200 amp bushing wells and/or insulating plugs and a ground clamp bar for use with regular grounding jumper assemblies. After the cable has been proven de-energized, the stud is installed and a ground is applied.

Also, available, the 1712 and 1725 grounding stud series are used for grounding when the fault duty on the 600 amp Deadbreak elbow/ “T” body exceeds the rating of a 200 amp grounding elbow, as rated by IEEE 386 @ 10kA for 10 cycles. Grounding studs consist of a 10” conductor stud with male or female threads for replacing 200 amp bushing wells and/or insulating plugs and a ground clamp bar for use with regular grounding jumper assemblies. After the cable has been proven de-energized, the stud is installed and a ground is applied.

Also available, 17250003, 17250004, and 17250005 are steel grounding plugs and studs with one 5/8” diameter perch. The perch has a sturdy lip to ensure clamp contact during faults. These models are supplied with grip-all attachments for application with insulated clampstick tools and connectors. These studs are used for grounding equipment such as non load-break connectors or power distribution connectors.

Underground Grounding Studs Accessories