A User ID is a user name and password that can be used to access several Honeywell Web sites.
The Temporary Transfer Arm is used to change crossarms,
insulators, or poles on short spans up to and including 15 kV phase
to phase. The mast (Cat. No. 1306M) is 2-1/2” in diameter by 6 feet
(1.82 m) long. The horizontal arm (Cat. No. 1340WHF8) is 2-1/2” in
diameter by 8 feet (2.44 m) long. The arm has a balanced load rating
of 600 lbs. (272 kgs); unbalanced at 150 lbs. (68 kgs). These units
are mounted to the pole using chain binders (Cat. No. 1304D) and
are rated for 15 kV without insulators and 35 kV with insulators.
The Temporary Side Arm - Pole Mounted holds energized conductors
during replacement of poles and repair or replacement of insulators. It is
made of 2-1/2” (6.3 cm) diameter foam-filled fiberglass with removable
and adjustable wire holders. Each arm has a strap hoist or chain binder.
Specify length of arm and number of wire holders needed. Side arms without
insulators are rated for 15 kV; with insulators, 35 kV. Eight foot side arm
includes arm support. WLL: 4 FT (1.22 M) - 300 LBS. (136 Kgs)
The 6 foot (1.83 m) side-mounted Temporary
Side Arm - Cross Arm Mounted has 2 wire
holders and is used as a temporary conductor
holder while replacing or repairing existing
conductors or insulators. Made from 21/2”
diameter foam- filled fiberglass. Both wire
holders are adjustable and removable. Units
without insulators are rated for 15 kV and 35
kV with insulators.
WLL: 300 LBS. (136 Kgs ) OR 150 LBS. (68
Kgs) PER WIRE HOLDER.