Grounding Sets

Single Point Distribution Grounding Set

Sets for Grounded “Y” Systems provide all the equipment required to safely ground a variety of structures on a grounded “Y” distribution systems. Factory assembled kits are for conductors ranging from #6 to 1-1/2” (3.8 cm) diameter, with serrated jaw “C” clamps with threaded terminals. All clamps are supplied with eye screws for installation with clampstick (not included). Other lengths and configurations are available.

Standard Equipotential Grounding Sets provide all the equipment required to safely ground a variety of structures on delta distribution systems. Factory assembled kits are for conductors ranging from #6 to 1-1/2” (3.8 cm) diameter, with smooth or serrated jaw clamps with threaded terminals. All clamps are supplied with eye screws for installation with gripall clampsticks (not included). Other lengths and configurations are available.

Ball Socket 4-Way Connecter Sets

Ball Socket 4-Way Connecter Sets are designed for variable angle accessibility, three-phase grounding. It is supplied with three-foot leads and six feet of cable from a common connection to ground. Upper heads are ball socket clamps (7542CM1E). Lower ground head is standard “C” type ground head (760001E) with a range of #6 to 1-1/4” (32 mm). Ball studs needed but not included.

Quick Grip Ground Clamps & Grounding Sets

Quick Grip Clamps are specifically designed and ideally suited for temporary grounding where spacing and orientation of components limit the use of traditional ground clamps. The Quick Grip Ground Clamp is available with a Grip-All eye or a Bayonet fitting for installation with a live line tool.

4-Way Connector Sets

The 4-Way Connecter Sets are made with #2 clear-jacketed, extra flexible cable, three 8-foot (2.44 m) leads from the heads to the common connection, and one 50-foot (15.25 m) lead from the common connection to the ground connection. The grounding 4-way connector set has a fixture to raise and lower the set which can be easily tied onto the pole. The 752076 grounding 4-way connector set is also supplied with 3 fiberglass handles (10078BC) and bag. The 752576 grounding 4-way connector set requires a clampstick. Sets come with bags. Other lengths and configurations available. Meets ASTM F 855 Grade 1 specifications. Maximum fault duty is 14.5 kA for 15 cycles.

Industrial Ground 4-way Ground Sets

The Industrial Ground Set consists of three upper ground heads, one lower head, visible trifurcation, six-foot (1.83m) leads to common connections, and a twenty foot lead from common to ground connection. All ground heads (7541B and 7541T) will accept 4”x 4”(10.2 x 10.2 cm) copper or aluminum bus configurations.

Ground Sets

Ground Sets include three upper heads and are easily and safely attached to the line with the fiberglass handles. The ground heads have a maximum opening of 1-3/4” (4.4 cm) and can be applied to angle irons, flat busses as well as on-line wires. A tight, four-point contact is made with the quick adjusting screw. The handles are easily removed when necessary. The lifting fixture provides ease when raising and lowering the set, and eliminates hanging the entire ground set’s weight on the conductor. Other lengths and configurations available.